Fundamentals Can Go a Long Way
For this shop, machining small parts from plastic is largely about applying the basics on a smaller scale.
#micromachining #Basics
When I called Chris Marchand of East Coast Precision Manufacturing to ask about the secret to machining small, complex plastic parts like the one shown above, I was somewhat surprised by his answer: a calm, patient mindset; a solid setup; a careful, light touch; and a deep understanding of machining fundamentals.
I’m not sure what I expected to hear, exactly. I suppose I expected something that small to require some special strategy or equipment beyond just being careful and patient. In fact, aside from two Swiss-type lathes, the machines at the 5,600-square-foot, Connecticut shop would be at home in virtually any other manufacturing operation, even though the shop specializes in this work. According to Mr. Marchand, cutting such small geometries is, in many ways, an exercise in applying the same principles used for conventionally sized work, just at a smaller scale and a great deal more carefully.
That’s not to say that small parts don’t involve any unique considerations. Yet, the fact that fundamentals were the first thing that came to Mr. Marchand’s mind illustrates just how far fundamentals can go. That’s a lesson any manufacturer can take to heart.
In fact, many of the challenges this shop deals with relate more to material than size. “The more I think about it,” Mr. Marchand said after further questioning, “the more I realize just how focused we are on controlling chips.” This article details a few of the shop’s go-to strategies for ensuring clean, burr-free cutting of some of the softest materials in the industry.
RELATED CONTENT
-
Cutting With A 0.001-Inch End Mill
JPL’s Space Instrument Shop does this routinely, but it takes some special equipment and some unusual procedures. Above all, it takes patience.
-
Does Small-Hole Drilling Demand a Fast Spindle?
A reader with a 10,000-rpm drill press can drill a 0.019-inch hole in stainless, as long as all the contributors to runout are controlled.
-
Four New High-Performance Milling Techniques for 3D Machining
With many 3D milling applications demanding both shorter cycle times and smoother surface finishes, it’s time to review how you go about programming and machining parts. These four strategies will let you rough dramatically faster and achieve astonishingly fine surface finishes.